Close up of the 3 point mounting system.
Franken corners. These were made to be removeable corner brackets for the plate.
I added 4 "attachment" points to the 4 corners of the stand.
The base of the stand
Close up of the 3 point mounting system.
The stand has a 3 point bessel leveling setup. These points are exactly as the manufacture requires.
Overall view of stand
expressline99

Close up of the 3 point mounting system.

Super complicated...OK not really Just has to be right where the manufacturer requires them for your plate. These are 1/2" x 13 threaded nuts. These are Non-coated. So no Zinc! Very easy to do just drill a hole larger than the threads and just small enough for the nut to be welded over it.
Click to expand...

Media information

Album
Surface plate stand build for 24x24x3 with 3 point mount leveling
Added by
expressline99
Date added
View count
907
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
84
Flash
Auto, did not fire
Filename
DSCN5917.JPG
File size
2.1 MB
Date taken
Sat, 08 July 2017 5:00 PM
Dimensions
3648px x 2736px

Share this media

Back
Top